Eskandari H

• Preparation Shop drawings bridge-related structural optioning and detailed Drawings, both for new build and modification to existing structures. • Coordination between different involved Departments(Utilities, Structure, HSE, Draftsmen, Surveyor, etc) • Providing technical direction and mentoring to Site engineers, Section Engineers technicians. • Preparation of outline drawings and detailed sketches of engineering solutions. • Interfacing with other engineering disciplines such as geotechnical, Dewatering, HSE, highways and environmental engineers • Resolving technical and construction-related issues as they occur and for the monitoring of progress • Preparation of technical approval documentation, contract documents and fee estimates. • Organizing and carrying out General, Principal & Special Inspections and preparation of inspection reports • Regular reporting of program/budget performance to line management • Controlling Health and Safety in the Bridges Sector, Underpass Troughs

Kuwait - RA/237 - Construction, Completion & Maintenance of roads, bridges, storm water drainage, sewers and other services for a new 4 lane dual expressways – connecting Mina Abdullah port and Wafra, Kuwait. Total length of roads 40km including 8 overpasses Contract Value: USD 198.5 Millions Responsibilities: • Conduct assessments and evaluations of structures • Attend meetings with clients, jurisdictional agencies, contractors, approved subcontractors and other professionals and organizations • Supervise all bridges activities in site • Supervise others (relevant site inspectors) including but not limited to administrative, technical and professional relevant site staff • Develop solutions to challenges presented by the client within budget, schedule and constraints • Revise reports, schedules, estimates of probable costs, Issuing of SOIs, JSI, NCR • Respond to contractor Technical enquiry by others as part of a TQM process • Perform peer reviews, forensic studies and expert reporting and witness services • Manage, administer, Review of structural/Nonstructural elements shop drawings as necessary and structural components such as piles, piers, deck slab, precast elements, pre-tension and post-tension elements, Expansion joints, finishing work, bearing calculation etc in project. • Control Geotechnical Report, foundation design, Plate load test, road preparation (Bridge loops and ramps) and controlling factors. • checking of Structural calculations, shops drawings etc. formworks related to piles, bridges, cast in situ, culverts and piers • Managing the engineering requirements demanded in the delivery of a section of work on the projects to meet the construction program • Checking dewatering and utility services in Bridges • Control culvert, Electrical Manhole, Sanitary manholes casting and installing in site • Controlling of Draining System of Bridge and Ramps • Supervising of All Retaining wall and M.S.E. Wall activities

Steel making plant+ Desalination Plant + CSI+WTP +AHU+OMHS+ etc. Contract Value: USD 571.5 Millions Responsibilities: • supervising and overseeing the direction of the project (or a package), ensuring that the client’s specifications and requirements are met, reviewing progress and liaising with quantity surveyors to monitor costs • liaising with the client, other construction professionals and, sometimes, members of the public • coordinating and supervising construction workers • selecting tools and materials • making safety inspections and ensuring construction and site safety • checking and preparing site reports, designs and drawings • maintaining quality control procedures • finding ways to prevent problems and to solve any that crop up • assessing and minimizing risk • writing reports and keeping on top of paperwork • helping to negotiating contracts and securing permits and licenses • As construction managers work on site wherever that site is, be prepared to relocate or face a longer commute as and when required. • Controlling of all technical aspect of designing road and utility services including sanitary and storm water, Land Scape, Road Work • Inform the project management team and supervision of any new or conflictive legislative matters that could impact the project and control safety and hazard with controlling HSE plan. • Maintained and ordered repairs for all site utilities. • Contributed to start-up teams in coordination with plant operators. • Oversaw safety program improvements and implemented capital development projects. • Maintained and updated standard operating procedures utility manuals. • Supervised construction to ensure all instrumentation equipment and piping adhered to safety codes. • Implemented design changes and integrity testing as required. • Updated management on project progress and issues as needed. • Monitored projects for adherence to engineering standards and practices.

Kuwait – RA 166,167 Approved Construction Specialist for construction – completion and maintenance of Roads, Overpasses, Storm Water drainage- Sewer and other services for Biggest road and bridge Project – Jahra Road Contract Value: USD 6275 Millions Responsibilities: • Checking the Structural Calculation Design REPORTS for the Technical and shop drawings works of the Structures inclusive of Bridge Piles, Pile Cap, Piers "Geometry & Reinforcement, flood control structures, construction Trough and similar public works facilities; • Designing of Piers & Diaphragms Drainage System Shop Drawings. • Bridge Ramp MSE Walls. • Utility Gallery, Storm Water Box Culvert & Fresh and Brackish water. • Designing of Water Supply Pipe Chambers Geometry & Steel Reinforcement Shop Drawings [Air Valve, Washout Valve, Sluice Valve, Butterfly Valve & Magnetic Flow Meter (Dull Tube)], • Designing of Storm Water Drainage Gullies and Manholes Geometry & Steel • Reinforcement Shop Drawings for Gullies Types A, 41, A2, K & K1, Manholes Types L, 2, 3,4 &5. • Cost control for The Rebar drawings of Piles, Pile Caps, Piers and Trough Base Slabs and Walls, • Designing of Water Supply Layout & Profile Shop Drawings. • Designing of Storm Water Layout & Profile Shop Drawings. • Preparing photographic report for existing utilities and project boundaries • reviews the work of professional, sub professional and clerical staff assigned to assist in the planning, • design and preparation of drawings, plans, specifications, bids and estimates on specific projects; • Represents the department at meetings and conferences with other agencies and with private organizations; • Prepares engineering and budgetary reports and recommendations. • Evening shift manager to control all activities (INFRA Structure) • Control quality of submitted material for site construction activities Achievements: Completion of biggest post tensioning Segmental Bridge(23 KM) in Persian Gulf

Kuwait – Jabber Al-Ahmad City for Construction of 1200 Building+ 54 Commercial Buildings and 36 Substation, Infra Structures such as road, utility, storm water, etc Contract Value: USD 495 Millions Responsibilities: • Develops project objectives by reviewing project proposals and plans; conferring with management. • Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors. • Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates. • Confirms product performance by designing and conducting tests. • Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. • Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. • Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions. • Controls project costs by approving expenditures; administering contractor contracts. • Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. • Maintains safe and clean working environment by enforcing procedures, rules, and regulations. • Maintains project data base by writing computer programs; entering and backing up data. • Maintains product and company reputation by complying with federal and state regulations. • Contributes to team effort by accomplishing related results as needed.

Kuwait – Road and Bridge Project – RA 126, Subiya (212 Million$) – 2005 till 2007 Site Civil& Structural Engineer in PAAET, New University project – Kuwait - (231 Million $)– 2003 till 2005 Civil and Structural Engineer in Construction of Emergency Shelters of K.O.C- (39.6 Million $)2001 till 2003 Responsibilities: • Processing the construction (Formworks, Rebar & Concrete Casting works) as well as works for Fly over & Crossing Bridges, Troughs, Pedestrian Bridges & Utilities and Sub-Structures of Bridge • Construction of recess areas, Back walls & Wing walls for Bridge • Supervise construction and installation of the Bridge • Supervise construction and the installation of the Utilities Bridge #1 & 2. • Supervise construction Trough # 5D & 5C (Base Slab & Walls), • Blinding area for Storm water lines, manholes and base slabs. • Breaking and treading of Piles Head. • Isolation works for the trough base slab. • Repairing and treading defects areas by using special building materials. • Creating schematics and plans for new construction projects • Developing budgets for construction projects • Reviewing Construction International code compliance • Resolving safety issues • Evaluating completed projects to ensure they satisfy all guidelines and specifications • Assist Building Engineer in performing preventative maintenance work • Communicates with management, partners, and Facility Services Manager regarding issues, project completion, timeliness, and workload priorities • Communicates with management, partners and Facility Services Manager regarding issues, project completion timelines and workload priorities • Interact with vendors/ contractors and assists in the supervision of all capital and tenant improvements • Manage all outside contractor work to ensure the contractors are trained and in compliance with our safety and environmental standards

As Site Civil Engineer • act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives • set out, level and survey the site • check plans, drawings and quantities for accuracy of calculations • ensure that all materials used and work performed are in accordance with the specifications • oversee the selection and requisition of materials • agree a price for materials and make cost-effective solutions and proposals for the intended project • manage, monitor and interpret the contract design documents supplied by the client or architect • liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project • liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws • communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress • day-to-day management of the site, including supervising and monitoring the site labor force and the work of any subcontractors • plan the work and efficiently organize the plant and site facilities in order to meet agreed deadlines